Ikelite SD630 instruction manual Please Read If Using an EV-Controller

Lid Snap Lock

Back View

Push Forward

Lift

Ikelite Digital Housing

i n s t r u c t i o n m a n u a l

#6140.08 for Canon S80

Congratulations on your purchase of an Ikelite Digital Camera Housing. Ikelite has over 40 years of experience in the underwater photographic and lighting market. Our products are designed and built in the USA by Ikelite for both the professional and amateur photographer.

The clear housing permits instant visual inspection of the camera and all sealing surfaces as well as complete monitoring of controls and camera LCD screens.

Ikelite Digital Housings are slightly negative in salt water for stability. This housing has been water pressure tested at the factory. Housing is pressure tested to 200’ (60m).

Please Read

We suggest that you read this instruction booklet thoroughly before use. If you are new to underwater photography be sure to read the General and Photo Tips.

We also suggest that you read the camera manual thoroughly to have a full understanding of where each camera control is located and what function each control provides.

Please Read If Using an EV-Controller

The EV-Controller used with Ikelite DS Substrobes have two user settings. One setting is for strobe selection, the other is for pre-flash or non pre-flash. This camera uses pre-flash, thus the EV-Controller should be set to the pre-flash position when used with this camera.

Print

Continous

Exposure

Comp. Zoom

ISO

Playback

Erase

Func. Set

➔Macro

Display

MF

Menu

Thumb

Rest

Lanyard

Flash/ ➔ Multi Control

Mode Dial

Shutter

Release

Lid

Snap

On/Off

Lens

Port

Lid Snap

Opening the Housing 1. Lid Snaps have a Lock.

To open, push Lid Snap Lock forward and lift as shown. Keep pressure on the Lid Snap so it does not fly open

quickly.

Some lid snaps have a

lot of spring tension

once they go over center, have a firm grip on the lid snap. Lid Snaps may be opened one at a time.

Front View

2 3