Ikelite SX210 IS Using Flash, Flash Deflector, Using Ikelite DS Digital Strobes, Substrobe DS51

Using Flash

The camera’s internal flash is blocked by the housing port. Do not use the internal flash unless the Flash Deflector is installed and you are using an external strobe.

Flash Deflector
A flash deflector
(supplied) can be
installed over the
back of the
housing port next
to the housing
exterior. The
deflector will
deflect the camera	Housing
flash when using	Deflector
an EV Manual

Controller. The

deflector will redirect the camera’s flash to the EV Controller which controls the external strobe output. To attach, push the deflector over the back of the housing port until the deflector clips into position, blocking the camera flash.

Using Ikelite DS Digital Strobes

Ikelite DS series Substrobes are industry favorites for their warm, even coverage and lightning fast recycle time. Being farther from the camera lens, the optional DS Substrobe aids in reducing the illumination of particles in the water and helps to eliminate backscatter. When used in conjunction with the EV-Controller, the DS51Mode switch is set to the TTL setting and the EV-Controller provides ten power settings in half-stop increments.

9

Using Strobes (cont.)
AF35 Strobe Package #4035	te		FLASH3AF5
The AutoFlash AF35kit is a great	ike AUT
compliment, and an effortless, affordable	li
way to add a flash to your new Ikelite	li	O
	ik
	e
point-and-shoot camera system. Everything	t
	e

you need to get started is in the box. Just
attach it to the bottom of your housing and
start taking pictures!
AF35 AutoFlash kit includes:
AF35 strobe - Flex arm - AutoFlash sensor
Handle with rubber grip - Tray (single or
dual) - Mounting hardware.
Substrobe DS51
The Substrobe DS51covers the equivalent of a 28mm lens. It is the
ideal choice when using only the camera lens with no accessory
wide angle lenses attached.
ikelite	Substrobe	Actual Size
	DS51	8 cm dia x 12 cm
SUBSTROBE DS51
ikelite		3.2" dia x 4.7"

DS161Movie Substrobe

The DS161Movie Substrobe combines all of the functionality of our renowned DS160 with a powerful 500 lumen LED video light. Three super-bright LEDs are arranged behind a special optical element to provide a 45 degree angle of coverage free of hotspots.

10

Using Strobes (cont.) DS161(cont.)

The DS161 flash covers the equivalent of an 18mm lens or 100 degrees w/diffuser installed. It is the ideal choice when using wide angle lenses greater than 80 degrees. It also features a 1.5 second recycle time and 225flashes per full charge.

SA-100 Ball/Socket Arm

SOS	Full	Fuel
TTL		Guage

Batt		-1
w/Lite			3
Off		-2	Ready Light
			2
On		-3
On	-4		1
w/Lite
		DS

DS161 Movie Substrobe

Actual Size

9.6cm dia x 17.9 cm 3.75" dia x 7"

Using Strobes (cont.)

Recommended Strobe Packages

Substrobe AF35 AutoFlash Kit #4035 includes Single Tray. Substrobe AF35 AutoFlash Kit #4035.1includes Dual Tray. Substrobe DS-51 Package #3944.54 includes #4086.61Arm System with EV Manual Controller.

Substrobe DS-160 Package #3944.91includes #4086.61Arm System and 1.5hour Smart Charger with EV Manual Controller. Substrobe DS-161Package #3945.03 includes #4086.61Arm System and 1.5 hour Smart Charger with EV Manual Controller.

Please Read If Using an EV-Controller

The EV-Controller used with Ikelite

The SA-100 system #4086.61 with it’s 1" diameter ball is ideal underwater. The #95713. extended stem mount allows easy attachment of the EV controller or flashlight mount, and drops right into the release handle. The arm system allows easy strobe placement from macro close-up to wide angle. The complete system removes with a push of the handle button.

ikelite	SA-100 Ball/Socket
	Arm #4086.61

#9571.3 Extended Stem Mount (included with SA-100 Ball/Socket arm)

11

DS Substrobes has two user settings. One setting is for strobe selection, the other is for pre-flash “P” or non pre-flash ”P”. This camera uses pre-flash, (except in manual mode), thus the EV-Controller should be set to the pre-flash “P” position when used with this camera as a slave. If manual mode is desired, set the EV-controller to the non-pre-flash “P” position.

12

Ikelite EV-Controller