Docking an iPod
Step 1: Turn the Adjustable Dial for iPod until the arrow on the dial is pointing to the listed iPod model to be docked.
•iPod models and memory sizes that are not listed on the Dock Adjustment Dial can be docked by manually adjusting the dial to the depth that fits the iPod best.
Step 2: Locate the numbered Bracket that fits the iPod that will be docked.
•Each included Bracket has a number on it, indicating which iPod model that bracket is compatible with. See the separate bracket chart page to identify which bracket is needed.
Step 3: Snap the Bracket into place over the iPod connector in the dock.
Step 4: Connect the iPod to the iPod connector inside the dock for iPod.
•When the unit is plugged in, using AC power, the docked iPod will charge. If the unit is running on batteries, DC power, the docked iPod will not charge.
Playing an iPod
Step 1: After docking an iPod, press the Power Button to turn the unit on.
Step 2: Press the Source Button to switch to iPod Mode.
Step 3: Press the Play/Pause Button to begin playing the docked iPod.
Tuning the Radio
Step 1: Press the Power Button to turn the unit on.
Step 2: Press the Source Button to switch to Radio Mode.
Step 3: Press the AM/FM Button to switch to AM or FM radio mode.
Step 4: Turn the Tuning Dial to the desired station.
Step 5: Extend the FM Antenna to improve FM radio reception.
•An AM antenna is built into the unit. Adjust the unit to improve AM radio reception.
Using the Auxiliary Input
Step 1: Connect an MP3 player or other audio source to the Auxiliary Input.
•This requires a 3.5mm auxiliary input cable, not included.
Step 2: Press the Power Button to turn the unit on.
Step 3: Press the Source Button to switch to Aux Mode.
Step 4: Audio played from the connected MP3 player or other audio source will now be heard through the unit’s speakers.
5
