Setting the Alarms
1.Press the Standby/AL Off Button to turn the unit off.
2.Press and hold the Mem Set/AL 1 or Mem Up/AL 2 Button until the alarm 1 or alarm 2 hour begins to flash on the LCD Display.
3.Press the Skip/Search Buttons to adjust the hour.
4.Press the Mem Set/AL 1 or Mem Up/AL 2 Button to set the hour, and the minute will begin to flash on the LCD Display.
5.Press the Skip/Search Buttons to adjust the minute.
6.Press the Mem Set/AL 1 or Mem Up/AL 2 Button to set the minute.
7.Press the Mem Set/AL 1 or Mem Up/AL 2 Button consecutively to cycle through the wake options for alarm 1 or alarm 2.
The unit can be set to wake to a buzzer, the radio, a docked iPod, or 1 of 5 nature sounds.
8.When the alarm is set to sound to nature sounds, indicated by “NS” on the LCD Display, press the Nature Sounds/Play/Pause Button to cycle through the 5 nature sounds.
Connecting to an Audio Player using the Aux Input
When connecting two products using an RCA Cable, match the colored ports with the same colored connection. (Red to Red, White to White, and Yellow to Yellow)
1.Plug one end of a 3.5 mm Cable (not included) or a 3.5 mm - RCA Cable (not included) into the AUX (Auxiliary) Input on the unit.
2.Plug the other end of the 3.5 mm Cable into the audio output/headphone output on an Mp3 Player or Other Audio Source.
3.Press the Standby/AL Off Button to turn the unit on.
4.Press the Function Button to switch the unit to Aux mode.
5.Audio played from the Mp3 Player or Other Audio Source will now be heard on the unit.
If connecting to the headphone output of an audio source, the source’s volume controls may need to be adjusted for optimal sound.
