Clock and Sleep Timer
Setting the Clock
1.If powered on, press the Power button to turn the unit off.
2.Press the Clock Set/Mem button.
3.Press the Tuning+/- buttons to adjust the hour.
The PM indicator will light when the hour is set in the PM.
4.Press the Clock Set/Mem button.
5.Press the Tuning+/- buttons to adjust the minute.
6.Press the Clock Set/Mem button again to finish setting the time.
Setting the Sleep Timer
1.Power on the unit by pressing the Power button.
2.Press the Source button to switch to FM Radio mode.
3.Press the Sleep button repeatedly to set the sleep timer ( 15, 30, 45, 60, 75, 90 min or OFF ).
4.Once the set sleep time has expired the clock radio will automatically power off.
Alarm
Setting the Alarm
1.If powered on, press the Power button to turn the unit off.
2.Press the Clock Set/Mem button repeatedly, skipping the clock setting process, until the alarm set is reached.
Snooze and Alarm Reset
After the alarm sounds:
Press the Snooze button to delay the alarm for several minutes.
OR
Press the Power button to turn the alarm off until the set alarm time is reached again.
Radio
Tuning the FM Radio
1.Power on the unit by pressing the Power button.
2.Press the Source button to switch to FM Radio mode.
3.Press the Tun+ and
4.Press and hold the Tun+ and Tun- buttons to search for the next available frequency.
5.Press the Vol+/- buttons to adjust the volume.
6.Turn the radio off by pressing the Power button.
Saving a Station as a Preset
1.Follow the instructions for Tuning the FM Radio.
2.Tune to the desired station.
3.Press and hold the Clock Set/Mem button.
4.Press the Tun+/- buttons to choose the preset number.
5.Press the Clock Set/Mem button to save the station as a preset.
Up to 20 stations may be saved as presets.
Bluetooth Setup
Pairing a Bluetooth Device for the First Time
1. | Power on the unit by pressing the Power |
| button. |
2. | Press the Source button to switch to |
| Bluetooth mode. |
| Bluetooth mode is indicated by “BT” on |
| the display. |
| “PAIR”will flash slowly on the display. |
3. | Press and hold the Pair button until |
| “PAIR” flashes quickly. |
| When pairing, remain within 3 feet of the |
| unit. |
4. | Using the native controls on your |
| Bluetooth device, select the “ICB352” in |
| your Bluetooth settings to pair. |
| If your device requests a password, enter |
| the default password “ 0 0 0 0 ”. |
| Refer to the user’s manual for your specific |
| device for instructions on pairing and |
| connecting Bluetooth devices. |
5. | When successfully paired and connected, |
| the display will show “PAIR”. |
| After initial pairing, the unit will stay paired |
| unless unpaired manually by the user or |
| erased due to a reset of the device. |
| If your device should become unpaired or |
| you find it is unable to connect, repeat the |
| above steps. |
| Note: ICB352 can store up to 8 devices. |
| The ninth paired device will replace the |
| first stored device in the unit’s memory. |
| The tenth device paired will replace the |
| second stored unit and so on. |
The Alarm 1 Indicator will flash.
3.Press the Tuning+/- buttons to adjust the hour.
The PM indicator will light when the hour is set in the PM.
4.Press the Clock Set/Mem button.
5.Press the Tuning+/- buttons to adjust the minute.
Tuning to a Preset Radio Station
1.Follow the instructions for Tuning the Radio and Saving a Station as a Preset.
2.Press the Clock Set/Mem button.
3.Press the Tun+ and
Radio Reception
Playing Audio Wirelessly
1. | Follow the instructions for Pairing a |
| Bluetooth Device. |
2. | Use the native controls on the |
| connected Bluetooth Device to select a |
| track. |
3. | To play or pause the selected track, use |
| the native controls on the connected |
6. Press the Clock Set/Mem button to finish | Adjust the position of the FM Antenna to |
setting the time. | improve FM radio reception. |
Bluetooth Device or press the Play/ |
Pause/Talk/End button. |
7.Press the Tuning+/- buttons to switch between Radio and Beep.
8.Press the Clock Set/Mem button. The Alarm 2 Indicator will flash.
9.To Set Alarm 2, follow above steps
10.Once the set alarm time is reached, the alarm will sound.
Cancelling the Alarm
1.Follow the instructions for Setting the Alarm.
2.Press the Al1/Al2 button repeatedly until the indicator is no longer lit.
Line In
Using the Line In
Requires a 3.5mm audio cable (not included)
1.Connect a 3.5mm audio cable to the Line In on the unit and an audio output on an MP3 player or other audio source.
2.Press the Source button to switch to Aux mode.
3.Use the native controls on the connected MP3 player or other audio source to play and control audio played through the clock radio.
4. Audio played through the connected |
Bluetooth device will now be heard |
through the speakers. |
Using the Speakerphone
1.Follow the instructions in Pairing a Bluetooth Device.
2.When a call is received, a ringtone will sound through the speakers.
3.Press the Play/Pause/Talk/End button to accept the call or accept the call with the native controls on the connected device.
4.The incoming call received through the device will now be heard through the speakers.
5.To end the call, press the Play/Pause/ Talk/End button or end the call using the native controls on the connected device.
International Support
To download this User’s Guide in English, | Para descargar este Manual del Usuario en | Pour télécharger ce guide de l’utilisateur en |
Spanish, or French, or to get answers to | inglés, español y francés, o para obtener | anglais, espagnol ou français, ou pour obtenir |
frequently asked questions, visit the support | respuestas a preguntas frecuentes, visite la | des réponses à des questions fréquemment |
section at: www.iLiveElectronics.com | sección de apoyo en www.iLiveElectronics. | posées, consultez la rubrique d’assistance |
| com | sur www.iLiveElectronics.com |
|
| |
For Warranty Information and the most | Customer Service: | |
Email Support: prodinfo@dpiinc.com, Email Parts: partsinfo@dpiinc.com |
| |
Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.
