Setup | Speaker Connection & Bluetooth Setup | |
Charging the Internal Batteries | Pairing the Speakers | Playing Audio Wirelessly |
DC power input: requires an AC/DC power adapter (included)
1.Connect one end of the included AC/DC power adaptor to the unit and one end to an AC power outlet to recharge the battery.
Note: Each speaker must be charged independently.
Note: Battery life when not in use is roughly 6 months. The battery must then be fully recharged.
Battery Indicator
Status | Indicator |
Power Off | No light |
|
|
Charging | Red light |
Fully Charged | No light |
Low battery | Flashing red light |
(Please charge each speaker for at least 2.5 hours before using).
ON/OFF |
DC IN 9V |
(This process should be done FIRST before pairing a Bluetooth device. This should only need to be done upon first use.)
1.Power on the speakers by sliding the power switch to the ON position on both units (first make sure both speakers are fully charged).
The Bluetooth Indicator and Speaker
Connection Indicator will flash slowly in unison. If the Speaker Connection Indicator is not flashing, but is solid white both speakers your speakers are already paired. You can skip to the Pairing a Bluetooth Device section.
2.Press the Connect Speakers button on both speakers simultaneously.
The Speaker Connection Indicators will flash quickly.
3.Wait until both Speaker Connection Indicators are solid white, this means the speakers have been successfully paired.
Please note that this process can take up to 1 minute.
Note : For all future uses please turn on both speakers and wait for them to connect (it may take up to 1 minute for them to pair automatically even after initial use). There should be no need to press Connect Speaker button again.
If any pairing issues should occur, please follow the above steps again.
Pairing a Bluetooth Device
1.Make sure you have first followed the instructions for Pairing the Speakers.
When pairing, the device should remain within 3 feet of the speakers.
2.Press the Pair button on ONLY one of the speakers. The pair indicator will begin flash quickly.
Using the native controls on your Bluetooth device, select the “ISBW2113” in your Bluetooth settings to pair.
If your device requests a password, enter the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specific device for instructions on pairing and connecting Bluetooth devices.
3.When successfully paired, the pairing indicator will stop flashing and will remain solid.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a reset of the device.
If your device should become unpaired, follow the above steps again.
If any pairing issues should occur,
Note : If two speakers with the ISBW2113 name appear on the pairing list of your device, please erase one of ISBW2113 listed in your Bluetooth device and repeat the above steps again.
1.Follow the instructions for Pairing a Bluetooth Device.
2.Use the native controls on the connected Bluetooth Device to select a track.
3.To play, pause or skip the selected track, use the native controls on the connected Bluetooth Device.
4.Any audio played through the connected
Bluetooth device will now be heard through the speakers.
International Support
To download this User’s Guide in English, | Para descargar este Manual del Usuario en | Pour télécharger ce guide de l’utilisateur en |
Spanish, or French, or to get answers to | inglés, español y francés, o para obtener | anglais, espagnol ou français, ou pour obtenir |
frequently asked questions, visit the support | respuestas a preguntas frecuentes, visite la | des réponses à des questions fréquemment |
section at: www.iLiveElectronics.com | sección de apoyo en www.iLiveElectronics. | posées, consultez la rubrique d’assistance |
| com | sur www.iLiveElectronics.com |
|
| |
For Warranty Information and the most | Customer Service: | |
Email Support: prodinfo@dpiinc.com, Email Parts: partsinfo@dpiinc.com |
| |
Copyright © 2013 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.
