Iluv i277 Troubleshooting - Continued, Maintenance & Troubleshooting Guide, V11M11 IM EN

Models: i277

1 29
Download 29 pages 25.96 Kb
Page 26
Image 26
Troubleshooting – Continued

Stereo Audio System for Your iPod

V11M11_IM_EN_12082006

MAINTENANCE & TROUBLESHOOTING GUIDE

Troubleshooting – Continued

Your iPod is not charged even though it is in the dock.

oYour iPod might not be properly docked. Take your iPod out of the dock, and remove any obstructions on the connector from the dock and on your iPod. Place your iPod back into the dock.

oYour iPod is frozen or locked up. Check whether your iPod operates correctly before placing it back into the dock. Please refer to the owner’s instruction manual of your iPod.

oYou are using the first, second, or third generation of iPod. First, second, and third generation of iPod is only charged with the FireWire connection. The FireWire connection is not supported by the i277.

There is no sound on the external speakers when connected by the audio patch cable.

oThe connected speakers lack a power source. Check if the external speakers are powered properly.

oYou are using passive speakers, which have no built-in amplifier. The signal from LINE IN/OUT jacks needs to be amplified. Use the active speakers, which have a built-in amplifier.

It does not find any AM radio stations, or there is a lot of static on a radio station.

oThe AM loop antenna is not connected to the i277. Connect the AM loop antenna to the jack on the back of the i277.

oThe i277 is installed where the reception is bad. Move the AM loop antenna around keeping it away from the main unit for the best reception.

When playing music, the sound gets distorted.

oThe volume level on the connected device or the i277 is set too high. Decrease the volume until the distortion has disappeared.

oThe source sound is distorted. If the original sound source (MP3) on your iPod is poor quality, the distortion and noises are easily noticed with high-power speakers. Try a different audio source like a music CD to test.

The remote control does not operate properly.

oThe installed battery is weak. Replace with a new battery.

oIt is not aimed to the i277 or too far away from it. Move within 10 feet of the unit and point the remote control toward the i277.

Sudden drop of volume or hear static or distortion when using devices with Bluetooth technology with BluePinTM

oPlease check your battery level and charge if necessary.

oMake sure you are not too far away from the unit.

- 25 -

www.i-Luv.com

Page 26
Image 26
Iluv i277 Troubleshooting - Continued, Maintenance & Troubleshooting Guide, Stereo Audio System for Your iPod