5.Press a 25mm Round Inner Cap (51) into the end of a Weight Storage Tube (21).
While a second person holds the Middle Crossbar (8) in the position shown, insert two M10 x 70mm Bolts (46) through the bracket on the Weight Storage Tube (21), the left Brace (2), and the bracket on the Middle Crossbar (8). Thread an M10 Nylon Locknut (11) onto each Bolt. Do not tighten the Nylon Locknuts yet.
6.Press a 25mm Round Inner Cap (51) into the end of the other Weight Storage Tube (21).
While a second person continues to hold the Middle Crossbar (8), insert two M10 x 70mm Bolts (46) through the bracket on the Weight Storage Tube (21), the right Brace (2), and the bracket on the Middle Crossbar (8). Thread an M10 Nylon Locknut (11) onto each Bolt. Do not tighten the Nylon Locknuts yet.
7.Have a second person hold the Top Crossbar (9) in the position shown.
Attach the Top Crossbar (9) to the left Upright (1) with two M10 x 70mm Bolts (46), a Small Support Plate (16), and two M10 Nylon Locknuts (11). Do not tight- en the Nylon Locknuts yet.
Attach the Top Crossbar (9) to the right Upright (1) with two M10 x 70mm Bolts (46), a Small Support Plate (16), and two M10 Nylon Locknuts (11). Do not tighten the Nylon Locknuts yet.
5 |
|
|
|
|
|
|
| 2 |
|
| 8 |
|
|
|
|
|
| 21 |
|
|
| 11 |
| 46 |
|
|
| 46 | 51 |
6 | 51 | 46 |
|
|
|
|
|
| |
|
|
| 21 |
|
| 46 |
|
|
|
|
| 2 | 8 |
|
|
|
|
| |
|
| 11 |
|
|
7 |
|
|
|
|
46 |
| 11 |
|
|
16 |
|
|
| |
|
| 9 |
| |
|
|
|
| |
|
| 11 | 11 |
|
46 |
|
|
| |
|
|
|
| |
|
|
|
| |
|
| Bar | 11 |
|
|
|
|
| |
|
|
|
| 16 |
|
|
|
| 46 |
|
| 1 |
|
|
|
|
| 1 |
|
|
|
|
| 46 |
8
