13
23. Turn the Seat (14) as shown.Attach the wide end of
the Seat to the bracket on the Seat Support Tube (37)
with two M6 x 16mm Screws (3).
Tilt the Seat Support Tube (37) upwards and attach
the narrow end of the Seat (14) to the Seat Support
Tube with an M6 x 38mm Bolt (60) and an M6
Washer (30).
23
60
30
3
37
14
24. Make sure that all parts are properly tightened before you use the weight bench.The use of all remain-
ing parts will be explained in ADJUSTING THE WEIGHT BENCHstar ting on the following page.