2
•
Local
CLI
management console port on a Mini Jack connector
•
Remote management capability through iMediaChassis series
•
AIS
generation on signal loss on all E1 interfaces
•
SNMP
Alarm TRAP reporting in managed chassis
•
MDI/MDIX automatic Ethernet port switching
The IE-iMcV-E1-Mux/4 module is a dual-wide iMcV module.
Compatible chassis include the following:
•
iMediaChassis series
•
MediaChassis series
•
IE-MediaChassis series
Product Application
The
IE-iMcV-E1-Mux/4 delivers 4 E1 lines to a customer's site over a protected,
dedicated fiber line. In addition, one serial RS-232 line and one 10/100BaseT
Ethernet line can be carried at the same time. All circuits run at full line rates with no
interaction.
E1-Mux
(Network)
ISP Internet
TDM Network
PSTN
E1
(4 port)
10/100BaseT
(1 Port) Customer
LAN
Customer
PABX
10/100BaseT
(1 Port)
E1
(4 Port)
Dedicated
Fiber E1-Mux
(Subscriber)
Local Far End
Remote
Serial PortSerial Port Dedicated
Fiber
Protection
(1+1)
Console Console
Console RS232
Host
Remote Far End
Managed Modules
The
IE-iMcV-E1-Mux/4 modules are installed as a Host/Remote pair. Host or Remote
configuration is selected by an onboard DIP Switch setting. The Host/Remote pair
can be remotely managed when the HOST is installed in an iMediaChassis with an
SNMP
Management Module.
Port Interfaces
A fully-configured IE-iMcV-E1-Mux/4 includes the following ports:
•
Four E1 ports on RJ-48 connectors short haul
•
One 10/100BaseT twisted pair Ethernet port
•
One fiber
SFP
port (requires
SFP
/155-ED module for each port)