CARE AND MAINTENANCE
1.Lubricate moving parts with
2.Inspect and tighten all parts before using the equipment.
3.The equipment can be cleaned using a damp cloth and mild
4.Examine the equipment regularly for signs of damages or wear.
5.Replace any defective components immediately and/or keep the equipment out of use until repair.
6.Failure to examine regularly may affect the safety level of the equipment.
WEIGHT CAPACITY AND DIMENSION
1.Maximum weight on Bar Catch Frame: 300 lbs
2.Maximum weight (including user weights) on bench: 600 lbs.
3.Cage Assembled Dimension: 39” x 65” x 83”
4.Bench Assembled Dimension: 70” x 24” x 46”
♦Bar Catch height ranges from 24.5” to 68.25” with 8 positions.
♦Each height increment is 6 ¼”.
♦Barbell is not included with Cage.
OPERATION NOTES
1.Use the Bench Backrest Incline Support to obtain the angle of Backrest.
2.Use the Seat Lock Pin to obtain the Seat Incline.
3.To lock the Leg Developer while not in use, simply pull the
4.Use Olympic Sleeve and Ø1 7/8” Spring Clips to load Olympic plates. Remove Olympic Sleeve and use Ø 7/8” Spring Clips to load Standard Plates.
ADI-5100-I BENCH BACKREST ADJUSTMENT ANGLES
©IMPEX INC. | 7 |
