ASSEMBLY INSTRUCTION
Tools Required For Assembling the Machine: One Crossing Wrench and Allen Wrench, provided by manufacturer.
NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury.
A.) Do not tighten Bolts until instructed to do so.
B.) Attach the Front Stabilizer (#39) to the Main Frame (#35). Secure it with four M8 x 5/8” Allen Bolts (#5)
and four 5/8” Washers (#6).
C.) Attach the Rear Stabilizer (#55) to the Main Frame. Secure it with four M8 x 5/8” Allen Bolts (#5), and four Ø 5/8” Washers (#6).
D.) Securely tighten all Bolts.
E.) Use the four Floor Level Adjustment Knobs (#38) to stabilize the Bike on floor.
© IMPEX INC. | 6 |
