Impex CB-359 manual Assembly Instruction, Diagram

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches

NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the Left Upright Beam (#1) and Right Upright Beam (#2) by a Cross Brace (#3) in the mid-span. Align the holes and secure each end of the Cross Brace with one 4 ¾” x 2” Bracket (#16), two M10 x 3 ½” Carriage Bolts (#33), two ∅ ¾” Washers (#43), and two M10 Aircraft Nuts (#47).

B.) Place the Backrest Adjustment Bar (#5) in between the two Upright Beams on the selected bar holder to obtain desired incline of Backrest Board.

C.) Insert two Crutches (#7) into the top openings on the Upright Beams. Push down the Plastic Sleeve (#31) until it locks in place. Secure the Crutches with two Lock Knobs (#30) through selected holes to obtain desired height of the Supports.

DIAGRAM 1

4