STEP 2 (See Diagram 2)
A.) Attach two Axle Spacers (#25) to the pivot on the rear of the Calf Raise Frame
(#4). Insert the Axle (#24) through the pivot and then attach the pivot to the bracket on the Seat Support (#18). Secure it with two M10 x 1” Allen Bolts (#11) and ∅ 1 3/8” Washers (#19).
B.) Attach the Calf Raise Bar Holder (#28) to the bracket on the side of Main Frame (#33). Secure it with one M10 x 2” Allen Bolt (#37), two ∅ ¾” Washers (#5), and one M10 Aircraft Nut (#30).
C.) Attach the Olympic Sleeve (#2) to the weight post on the Calf Raise Frame (#4). Secure it with one M8 x ½” Allen Screw (#3). Attach the Spring Clip (#1) to the Olympic Sleeve.
DIAGRAM 2
5
