Impex IGS-8862 manual Diagram

STEP 3 (See Diagram 3)

A.) Do not tighten Nuts and Bolts until instructed to do so.

B.) Align the bracket on the Backrest Adjustment Support (#20) in between the two Backrest Supports (#25). Secure it with four M8 x 1 5/8” Allen Bolts (#52), eight Ø 5/8” Washers (#55), and four M8 Aircraft Nuts (#57).

C.) Insert the Backrest Adjustment Support into the opening on the Main Seat Support (#9). Press or step down on the Backrest Adjustment Lever (#26) to allow the Support to go through.

D.) Attach the bottom side-holes on the two Backrest Supports to the pivot on the Main Seat Support. Secure it with one M10 x 6 ½” Allen Bolt (#47), two Ø ¾” Washers (#54), and one M10 Aircraft Nut (#56).

E.) Attach the Backrest Board (#17) to the Backrest Supports. Secure it with four M8 x 1 5/8” Allen Bolts (#52) and four Ø 5/8” Washers (#55).

F.) Place the Seat Pad (#18) onto the Seat Bracket (#12). Secure it with four M8 x 1 5/8” Allen Bolts (#52) and four Ø 5/8” Washers (#55).

G.) Securely tighten all Nuts and Bolts installed.

DIAGRAM 3

7