Impex MD-377 manual Assembly Instruction, Diagram

ASSEMBLY INSTRUCTION

Tools Required for Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches

NOTE: It is strongly recommended that two or more people assemble this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Plug the two Upright End Caps (#17) onto the bottom of the Right & Left Upright Beams (#1 & #2). Secure each Cap with a ST5 Screw (#40).

B.) Connect the two Upright Beams by a Cross Brace (#4) in the Mid-span. Secure them with two M10 x 3 1/8” Carriage Bolts (#27), one Curved Bracket (#13), two ∅ ¾” Curved Washers (#37), and two M10 Aircraft Nuts (#38) on each end of Cross Brace.

C.) Insert the Backrest Adjustment Bar (#9) through the holes on the two Uprights to obtain desired incline of Backrest.

DIAGRAM 1

5