Impex MP 1105 manual See Diagram

STEP 2 (See Diagram 2)

A.) Slide 9 Weight Plates (#37) onto the Guide Rods (#7). Make sure the grooves on the Plates all face up and to the same direction. Insert a Selector Rod (#21) into the center hole on the Plates. Slide the Selector Stem (#36) onto the Guide Rods.

B.) Attach the Upper Frame (#6) onto the Guide Rods (#7). Secure it with two M10 x 1” Allen Bolts (#72) and Ø ¾” Washers (#79).

C.) Place the Upper Frame (#6) onto the Vertical Frame (#2). Secure it with two M10 x 2 3/8” Carriage Bolts (#78), one U-shaped Bracket (#22), two ∅ ¾” Washers (#79), and two M10 Aircraft Nuts (#82).

D.) Attach the Foot Plate (#27) to the Front Base Frame (#19). Insert the Foot Plate Axle (#28) through the holes to secure the Foot Plate.

9