Impex PHC 698 manual Assembly Instruction, Diagram

ASSEMBLY INSTRUCTION

Tools Required to Assemble the Machine: Two Adjustable Wrenches and Allen Wrenches

NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the Left & Right Upright Beams (#1) & (#2) by a Cross Brace (#3) in the mid-span. Align the holes and secure them with one 4 ¾” Bracket (#7), two M10 x 2 ¾” Carriage Bolts (#41), two ∅ ¾” Washers (#37), and two M10 Aircraft Nuts (#38) on each end of the Cross Brace.

B.) Insert two Crutches (#4) into the top openings on the Upright Beams. Secure them with two Lock Knobs (#8) through selected holes to obtain desired height of the Supports.

DIAGRAM 1

4