STEP 2 (See Diagram 2)
A.) Attach the Leg Developer Holder (#5) to the Front Base (#6). Secure it with three M10 x 5/8” Allen Bolts (#52) and ∅ ¾” Washers (#48).
B.) Attach the Leg Developer Holder (#5) to the front of the Main Seat Support (#4). Secure it with one M10 x 2 ½” Carriage Bolt (#60) from the top, two M10 x 2 ¾” Carriage Bolts (#51) from the side, three ∅ ¾” Washers (#48) and three M10 Aircraft Nuts (#49).
C.) Attach the Rear of the Main Seat Support (#4) to the Cross Brace (#3). Secure it with one Bracket (#10), two M10 x 2 ¾” Carriage Bolts (#51), two ∅ ¾” Washers (#48), and two M10 Aircraft Nuts (#49).
DIAGRAM 2
5
