Functions and Operations

Function & Mode	Action
Scan	Press the button until SCAN appears on the screen.
	Monitor will rotate through all functions –
	Time, Calorie, Speed, Odometer, and Distance.
	Each display will hold for 4 seconds.
Speed	Press the button until SPEED appears on screen.
	Monitor will display the current speed in Mile per Hour.
Distance	Press the button until DIST appears on screen.
	Monitor will display the distance has traveled.
Time	Press the button until TIME appears on screen.
	Monitor will display the accumulation of riding time.
Calorie	Press the button until CAL appears on screen.
	Monitor will display the calorie consumptions.
Reset	Press and hold the button for more than 2 seconds to
	reset all data to 0.

1.Pull off the battery cover and place two SIZE-AA batteries into the battery compartment on the back of the computer (See Diagram below).

2.Make sure batteries are correctly positioned and springs are properly contacted with batteries.

3.Put the cover back. The Battery life is approx. 1 year under normal usage.

4.If the display is blurred or only partial appeared, remove the batteries and wait for 15 seconds then re-install the batteries.

5.Remove the batteries will erase all computer memories.

Impex PL-01012RP manual Functions and Operations