ASSEMBLY INSTRUCTION
Tools Required to Assemble the Machine: Two Adjustable Wrenches and Allen Wrenches
NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury.
STEP 1 (See Exploded Diagram)
A.) | Attach a base Frame (#19) to the end of Main Base Frame (#4). Secure it with one | |
| Bracket (#18), two M10 x 2 ¾” Carriage Bolts (#6), two ∅ | ¾” Washers (#9), and M10 |
| Aircraft Nuts (#23). Repeat the same procedure to connect the other Base Frame | |
| (#19) on the other side. |
|
B.) | Attach the Left Rear Vertical Frame (#12) to the Base Frame (#19). Align the holes to | |
| the Bracket (#18). Secure it with two M10 x 2 ¾” Carriage Bolts (#6), ∅ ¾” Washers | |
| (#9), and M10 Aircraft Nuts (#23). Repeat the same procedure to install the other | |
| side. |
|
C.) | Attach the Front Vertical Frame (#25) to the Base Frame (#19). Secure it with three | |
| M10 x 5/8” Allen Bolts (#8) and ∅ ¾” Washers (#9). Secure the Front Vertical Frame | |
| (#25) to the Left Rear Vertical Frame (#12) with two M10 x 5/8” Allen Bolts (#8) and | |
| ∅ ¾” Washers (#9). Repeat the same procedure to install the other side. | |
D.) | Attach one Diagonal Support (#5) to the Main Base Frame (#4). Attach the other end | |
| to the Rear Vertical Frame (#12). Secure the top and the bottom of the Diagonal | |
| Support (#5) with two M10 x 2 ¾” Carriage Bolts (#6), ∅ | ¾” Washers (#9), and M10 |
| Aircraft Nuts (#23). Repeat the same procedure to install the other side. | |
E.) | Insert two Weight Holders (#13) into the two holes on the Rear Vertical Frame (#12). | |
| Secure each Weight Holder with one M10 x 1” Allen Bolt (#24) and ∅ ¾” Washer | |
| (#9). Slide two Olympic Sleeves (#14) onto the Holders. Secure each Sleeve with a | |
| M8 x ½” Allen Set Screw (#16). Repeat the same procedure to install the other side. | |
F.) | Insert the Right & Left Bar Catches (#1) & (#20) into the selected holes on the Front | |
| Vertical Frames (#25). |
|
4
