Impex TSA-499 manual Assembly Instruction

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen

Wrenches. NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury.

STEP 1 (See Diagram 1)

A.) Connect the Left & Right Upright Beams (#1 & 2) by a Cross Brace (#8) in the mid-span. Align the holes and secure each end with one 4 ¾” x 3 1/8” Bracket (#17), two M10 x 2 3/8” Carriage Bolts (#41), ∅ ¾” Washers (#49), and M10 Aircraft Nuts (#48).

B.) Insert the Backrest Adjustment Bar (#9) through the selected holes on the Upright Beams. C.) Insert the Left & Right Safety Catches (#12 & 13) into the selected holes on the Left &

Right Upright Beams.

DIAGRAM 1

6