ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches. NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) | Connect the Left and Right Upright Beams (#1) & (#2) by a Cross Brace (#3) in the mid- |
| span. Align the holes and secure them with one Bracket (#16), two M10 x 3 ¾” Carriage |
| Bolts (#41), two ∅ ¾” Washers (#48), and two M10 Aircraft Nuts (#47) on each end of |
| the Cross Brace. Plug four ∅ 3” Round End Caps (#35) to the base on the Upright |
| Beams. |
B.) | Place Backrest Adjustment Bar (#7) between the two Upright Beams on the selected |
| bar holder to obtain desired incline of Backrest. |
C.) | Insert two Crutches (#6) into the top openings on the Upright Beams. Secure them with |
| two Lock Knobs (#42) through selected holes to obtain desired height of the Supports. |
D.) | Insert the Left and Right Safety Hooks (#18) & (#19) into the holes on the Crutches |
| (#6). Secure them with two M8 Aircraft Nuts (#46). |
E.) | Attach the Main Seat Support (#4) to the Front Stabilizer (#5). Secure it with two M8 x |
| 5/8” Allen Bolts (#40) and ∅ 5/8” Washers (#49). |
F.) | Connect the Main Seat Support (#4) and Rear Base Support (#12) to the Cross Brace |
| (#3). Align the holes and secure them with two M10 x 3 ¾” Carriage Bolts (#41), ∅ ¾” |
| Washers (#48) and M10 Aircraft Nuts (#47). |
4
