Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.

If the appliance is level, it will help ensure proper perfor- mance.

This dishwasher model can be built-in under the one worktop, and it therefore comes provided with an instructions sheet.

Cold Water Connection

Connect the cold water supply hose to a threaded 3/4 (gas) connector, inserting the small filter supplied with the dishwasher and making sure

that it is fastened tightly in place (see figure 2).

If the water pipes are new or have not been used for an extended period of time, let the

	water run to make sure that the	A
	water run to make sure that the
	water is clear and free of
	impurities. If this precaution is
	not taken, there is a risk that the	Fig.2
	water inlet can get blocked and	Fig.2
	water inlet can get blocked and
	damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60° C.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Drain Hose Connection Insert the drain hose into a drain pipe with a minimum diameter of 4 cm., or let it run into the sink, making sure to avoid bending or crimping it. Use the speical plastic support that comes with the appliance (see figure to the right). The free end of the hose must be at a height between 40 and 100 cm.and must not be immersed in water.

Attention: The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adpators or the like as they could cause overheating and burns.

Should the electricity supply cable be damaged, we recommend that you only contact authorised Technical Service Centres for the replacement.

DE 43 specifications

The Indesit DE 43 is a feature-rich and efficient dishwasher designed for households seeking a blend of performance and convenience. With a contemporary white finish, it not only enhances the aesthetic appeal of the kitchen but also seamlessly integrates into various decor styles.

One of the standout features of the Indesit DE 43 is its generous capacity, accommodating up to 13 place settings. This makes it an ideal choice for families or those who frequently host gatherings, ensuring that you can efficiently clean a number of dishes, pots, and cutlery in a single load.

The dishwasher is equipped with multiple wash programs tailored to different needs. These include intensive cycles for heavily soiled items, eco programs for energy-efficient cleaning, and quick cycles that deliver clean dishes in a hurry. The adjustable upper basket is a notable characteristic, allowing users to customize the interior space according to the size of the load, making it easier to fit in larger pots or pans.

In terms of technology, the Indesit DE 43 boasts efficient energy performance, often rating highly on energy efficiency scales. The appliance uses less water and energy compared to traditional washing methods, helping homeowners save on utility bills while also being environmentally friendly. The noise levels are also commendably low, making it suitable for open-plan living spaces or homes with young children.

Moreover, the dishwasher features a sensor that optimizes the wash cycle based on the level of dirtiness detected, ensuring that every load is cleaned to perfection without wasting resources.

User-friendly controls and an intuitive display make operation simple, even for those who may not be tech-savvy. The delay start function allows users to set the appliance to run during off-peak hours, which can lead to further savings on energy costs.

Safety features are also included, with a child lock to prevent accidental operation, ensuring peace of mind for families. Overall, the Indesit DE 43 stands out as a reliable dishwasher that combines versatility, efficiency, and ease of use, making it a valuable addition to any modern kitchen.

Indesit DE 43 manual Installation

Models: DE 43