Installation

Electrical Requirements

For your own safety, we recommend that your cooker is installed by a competent person such as one who is registered with NICEIC (National Inspection Council for Electrical Installation Contracting). The cooker should be installed in accordance with the latest edition of the IEE Regulations.

Warning: This appliance must be earthed.

Electrical Connections

The installer must check that the voltage shown at the rating plate corresponds with the house electricity supply.

The cooker must be supplied via a suitable double pole isolating switch, having a contact separation of at least 3mm in all poles placed in a readily accessible position adjacent to the cooker.

If the cooker is to be wired into a connector unit, this may be positioned behind the cooker providing the following requirements are met:

i)The connector unit must not project from the wall more than 25mm.

ii)The top of the connector must not be more than 130mm above floor level.

Remove the terminal cover at the rear base of the cooker. Pass the cable through the cable clamp and connect to the appropriate terminals provided.

Allow sufficient cable for any future servicing.

Tighten the screws on the cable clamp and replace the cover.

Make main connections in the connector unit or cooker control unit.

This appliance conforms to B.S. EN 55014 regarding suppression of Radio and Television reception interference.

Adouble Pole control switch having a minimum rating of 32 amps should be used to feed the cooker using a suitably rated cable.

Where a hob is fitted adjacent to or over the cooker, a 45 amp Double Pole control switch should be used to feed both units via separate suitably rated cables.

We recommend a minimum of 4mm2 PVC insulated twin and earth cable conforming to B.S. 6004 for connection of each appliance.

Where a hob is fitted above the cooker the cable connecting the hob to the cooker control unit must be of 2.5mm2 85o C heat resistant cable to BS6141 table 15

In all cases adhere to routing details (see fig. 4).

This appliance must not be installed over any other appliance that generates heat such as a plinth heater

Note: Due to many different types of installation, a mains cable is not supplied with this product. The installer will fit the correct type and length of cable.

31

Page 30 Page 32
Page 31
Image 31
Indesit FDE20 Installation, Electrical Requirements, Electrical Connections, All cases adhere to routing details see fig
Page 30 Page 32

FDE20 specifications

The Indesit FDE20 is a freestanding tumble dryer that combines efficiency and practicality, catering to modern household needs while ensuring that laundry care remains simple and effective. This model offers a range of features designed to accommodate various drying requirements while maintaining convenience and performance.

One of the standout features of the Indesit FDE20 is its substantial drying capacity of up to 8 kg, which makes it ideal for large families or households with frequent laundry needs. This capacity allows users to dry more clothes in a single load, saving both time and energy. The dryer is equipped with a selection of drying programs tailored to meet specific fabric needs. From delicate items that require gentle care to cottons that can withstand higher temperatures, the FDE20 protects your garments while effectively removing moisture.

The Indesit FDE20 incorporates a user-friendly dial control system, making it straightforward to select the desired drying cycle. It includes various preset programs that simplify the drying process, taking the guesswork out for users. Additionally, it features a reverse tumble action, which helps to reduce tangling and ensures that clothes dry evenly, minimizing the risk of creasing.

Energy efficiency is another focal point for the Indesit FDE20. It operates with a C energy rating, which is competitive among tumble dryers, delivering energy savings without compromising performance. The model also features a condensation drying system, allowing it to extract moisture efficiently while ensuring that no venting kit is required, making installation easy and flexible.

In terms of construction, the Indesit FDE20 is designed with a robust build, ensuring durability while fitting seamlessly into any home setting. Its sleek and modern design, complemented by a white finish, allows it to fit harmoniously with other appliances.

Safety features are also well integrated within the dryer, including a final cool down phase that helps to reduce the risk of burns and protects fabrics.

In summary, the Indesit FDE20 stands out for its generous capacity, user-friendly operation, energy efficiency, and thoughtful design, making it a reliable choice for anyone looking to simplify their laundry processes while ensuring optimal care for their garments.
Top Page Image Contents