Indesit IBXXAAXX, IBXXAXX manual Maintenance and care, Precautions and tips, Cleaning the appliance

Models: IBXXAAAXX BIAXXXX BIAAXXXX BIAAAXXXX IBXXAAXX IBXXAXX

1 8
Download 8 pages 36.6 Kb
Page 7
Image 7
Cleaning the appliance

The temperature inside the freezer compartment automatically adjusts itself according to the position of the thermostat knob.

Avoiding mould and unpleasant odours = warmest

= coldest

We recommend, however, a medium position.

ECO is the optimal temperature for energy saving levels. switches the appliance off, including the refrigerator.

Do not re-freeze food that is defrosting or that has already been defrosted. These foods must be cooked and eaten (within 24 hours).

Fresh food that needs to be frozen must not come into contact with food that has already been defrosted.

Do not place glass bottles which contain liquids, and which are corked or hermetically sealed in the freezer because they could break.

The maximum quantity of food that may be frozen daily is indicated on the plate containing the technical properties located on the bottom left side of the refrigerator compartment (for example: Kg/24h: 4)

To maximise space inside the freezer, all drawers [with the exception of the bottom drawer] can be removed from their positions and the food placed directly on the racks/glass shelves supplied [where present].

!Do not open the door during freezing.

!If there is a power cut or malfunction, do not open the freezer door. This will help maintain the temperature inside the freezer, ensuring that foods are conserved for at least 9 -14 hours.

!To avoid blocking the air circulation inside the freezer, it is advisable not to obstruct the ventilation holes with food or containers.

!To maximise space inside the freezer, all drawers [with the exception of the bottom drawer] can be removed from their positions and the food placed directly on the racks/glass shelves supplied [where present].

Ice3 ice tray

The fact that they are situated on the top part of the freezer drawers ensures greater cleanliness: the ice no longer comes into contact with the food placed inside the freezer compartment; furthermore, the dripping of the water during filling is avoided (a lid to cover up the hole after filling with water is also provided).

1.Pull out the tray by pushing it up. Check that the tray is ompletely empty and fill it with water through the opening provided.

2.Take care not to exceed the level indicated (MAX WATER LEVEL). Excess water prevents the ice cubes from dispensing (if this happens, wait for the ice to melt and empty the tray).

3.Turn the tray 90°: due to the connected compartments each mould fills with water (see diagram).

4.Close the opening with the lid provided and put the tray back, placing the top part in the corresponding housing and allowing it to drop in again.

5.When the ice has formed (minimum time approximately 8 hours) knock the tray against a hard surface and wet the outside so that the ice cubes come loose and take them out through the opening.

 

 

 

GB

 

 

 

MAX

 

 

 

WATER LEVEL

 

 

WATER

MAX

WATER LEVEL

MAX

LEVEL

 

Cleaning the appliance

We recommend you clean your fridge with our Professional

Fridge cleaner.To order please call us on 08448 225 225 or visit www.indesitservice.co.uk

The external and internal parts, as well as the rubber seals may be cleaned using a sponge that has been soaked in lukewarm water and bicarbonate of soda or neutral soap. Do not use solvents, abrasive products, bleach or ammonia.

The removable accessories may be soaked in warm water and soap or dishwashing liquid. Rinse and dry them carefully.

The back of the appliance may collect dust which can be removed by delicately using the hose of a vacuum cleaner set on medium power. The appliance must be switched off and the plug must be pulled out before cleaning the appliance.

Avoiding mould and unpleasant odours

The appliance is manufactured with hygienic materials which are odour free. In order to maintain an odour free refrigerator and to prevent the formation of stains, food must always be covered or sealed properly.

If you want to switch the appliance off for an extended period of time, clean the inside and leave the doors open.

Replacing the light bulb

We recommend you clean your fridge with our Professional

Fridge cleaner.To order please call us on 08448 225 225 or

visit www.indesitservice.co.uk

To replace the light bulb in the refrigerator compartment, pull out the plug from the electrical socket. Follow the instructions below. Access the light bulb by removing the cover as indicated in the diagram. Replace it with a similar light bulb within the power range indicated on the cover.

1

1

 

2

Maintenance and care

Switching the appliance off

During cleaning and maintenance it is necessary to disconnect the appliance from the electricity supply:

1.set the FREEZER OPERATION knob on

2.pull the plug out of the socket

Precautions and tips

!The appliance was designed and manufactured in compliance with international safety standards. The following warnings are provided for safety reasons and must be read carefully.

This appliance complies with the following Community Directives:

-73/23/EEC of 19/02/73 (Low Voltage) and subsequent amendments;

-89/336/EEC of 03.05.89 (Electromagnetic Compatibility) and subsequent amendments;

-2002/96/CE.

PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR 5 YEAR PARTS GUARANTEE ON 08448 24 24 24

7

Page 7
Image 7
Indesit IBXXAAXX Maintenance and care, Precautions and tips, Cleaning the appliance, Avoiding mould and unpleasant odours