Condenser unit - remove any fluff |
|
from the condenser on a monthly basis. | EN |
|
Step 1
Open the condenser cover - grip the handle and pull towards you.
Step 2
Remove the condenser by turning the 3 catches, then pull the condenser towards you. (It is normal for some residual water to be left in the tubes).
Step 3
Clean the condenser with running water over the rear side to remove any fluff deposits.
Step 4
Replace the condenser unit; make sure that the unit is securely in place, that all 3 catches are fixed and that the position arrows on the front end of the condenser are pointing upwards.
Failure to clean the condenser unit may cause premature failure of the dryer.
3