Installation

Positioning the Appliance

Position the appliance in the desired location. The back should rest against the wall behind it, and the sides, along the adjacent cabinets or wall. The dishwasher is equipped with water supply and drain hoses that can be positioned to the right or the left to facilitate proper installation.

Levelling the Appliance

Once the appliance is positioned, adjust the feet (screwing them in or out) to adjust the height of the dishwasher, making it level. In any case, the appliance should not be inclined more than 2°.

If the appliance is level, it will help ensure proper perfor- mance.

This dishwasher model can be built under a single worktop (please read the relevant instruction sheet).

Cold Water Connection

This electric household appliance should be connected to the water mains using the cold water supply hose provided with the appliance only. Do not

use a different hose. In the event of replacements, use original spare parts only.

Connect the cold water supply hose to a threaded 3/4 (gas)

	connector, inserting the small	A
	connector, inserting the small
	filter supplied with the
	dishwasher and making sure
	that it is fastened tightly in place	Fig.2
	(see figure 2).	Fig.2
	(see figure 2).
	If the water pipes are new or

have not been used for an extended period of time, let the water run to make sure that the water is clear and free of impurities. If this precaution is not taken, there is a risk that the water inlet can get blocked and damage the appliance.

Hot Water Connection

The water supply to the appliance can also be connected to the house's hot water line (centralised system, heating system), as long as it does not exceed a temperature of 60° C.

In this case, the wash cycle time will be shortened by about 15 minutes and the wash efficiency slightly reduced.

The connection must be made to the hot water line following the same procedures as those for the connection to the cold water line.

Drain Hose Connection
Fit the drain pipe into a drain
					A
line with a minimum diameter
of 4 cm or place it over the
sink. Avoid restricting or
bending it. Use the special
plastic elbow provided (see fi-
gure) to position it in the best

possible way. The part of the
pipe marked with the letter A
should be between 40 and

100 cm above the ground.
The pipe should not be immersed in water.

Attention: The special plastic hose support must be solidly fastened to the wall to prevent the drain hose from moving and allowing water to spill outside the drain.

Electrical Connection

After making sure that the voltage and frequency values for the current in the home correspond to those on the rating plate (located on the stainless steel inner door of the appliance) and that the electrical system is sized for the maximum voltage on the rating plate, insert the plug into an electrical socket which is earthed properly (the earthing of the appliance is a safety requirement mandated by law). If the electrical socket to which the appliance must be connected is not appropriate for the plug, replace the plug, rather than using adpators or the like as they could cause overheating and burns.

Should the electricity supply cable be damaged, we recommend that you only contact authorised Technical Service Centres for the replacement.

IDL 500 specifications

The Indesit IDL 500 is a reliable and efficient integrated dishwasher designed to make dishwashing a breeze. With a sleek appearance that seamlessly blends into your kitchen, this model embodies functionality without compromising on style.

One of the standout features of the Indesit IDL 500 is its generous capacity. With the ability to accommodate up to 13 place settings, this dishwasher is perfect for larger families or for those who entertain guests frequently. The adjustable top basket allows users to customize the interior space, making it easy to fit larger pots and pans while ensuring that all your dishes are thoroughly cleaned.

The Indesit IDL 500 also boasts a range of wash programs tailored to meet different cleaning needs. With multiple settings that include Eco, Intensive, and Quick Wash programs, you can choose the perfect cycle for your load. The Eco program is designed to save water and energy, making it an environmentally friendly choice without compromising on cleaning performance.

One of the key technologies incorporated in the Indesit IDL 500 is the Smart Sensor feature. This innovative technology detects the level of dirt on the dishes and automatically adjusts the wash cycle accordingly. This ensures optimal cleaning while conserving water and energy, making it an economical option for households.

The appliance is equipped with a powerful motor that operates quietly, allowing you to enjoy a peaceful environment in your home. The noise level is kept to a minimum, so you can run the dishwasher at any time of day or night without disturbing your household.

Moreover, the Indesit IDL 500 is designed with user convenience in mind. The control panel is straightforward, allowing for easy selection of programs and settings. Featuring a delayed start option, users have the flexibility to schedule their wash cycles at a time that suits them best.

In terms of energy efficiency, the Indesit IDL 500 holds an impressive energy rating. This not only translates to lower electricity bills but also reflects a commitment to reducing environmental impact.

Overall, the Indesit IDL 500 integrates advanced technology with user-friendly features, making it a superb addition to any kitchen. Its capacity, versatility, and energy efficiency make it a top choice for consumers seeking a dependable dishwasher that meets both practical and aesthetic demands.

Indesit IDL 500 manual Installation

Models: IDL 500