To ensure floods do not occur, the dishwasher:
-is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.
Some models are also equipped with the supplementary safety device New Acqua Stop*, which guarantees anti- flooding protection even in the event of a supply hose rupture.
WARNING: HAZARDOUS VOLTAGE!
Under no circumstance should the water inlet hose be cut as it contains live electrical parts.
Electrical connection
Before inserting the plug into the electrical socket, make sure that:
•The socket is earthed and complies with current regulations.
•The socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see chapter entitled Description of the appliance).
•The power supply voltage falls within the values indicated on the data plate on the inside of the door.
•The socket is compatible with the plug of the appliance. If this is not the case, ask an authorised technician to replace the plug (see Assistance); do not use extension cables or multiple sockets.
Once the appliance has been installed, the power supply cable and the electrical socket should be easily accessible.
The cable should not be bent or compressed.
If the power supply cable is damaged, it must be re- placed by the manufacturer or its Technical Assistance Service in order to prevent all potential hazards. (See As- sistance)
The Company shall not be held responsible for any incidents that occur if these regulations are not observed.
EN | ||
After installing the dishwasher, open the door and stick | ||
| ||
the adhesive transparent strip under the wooden shelf in |
| |
order to protect it from any condensation which may |
| |
form. |
| |
Advice regarding the first wash cycle |
| |
After the appliance has been installed, immediately |
| |
before running the first wash cycle, completely fill the |
| |
salt dispenser with water and add only then |
| |
approximately 1 kg of salt (see chapter entitled Rinse aid |
| |
and refined salt). The water may overflow: this is normal |
| |
and is not a cause for concern. Select the water |
| |
hardness value (see chapter entitled Rinse aid and |
| |
refined salt). - After the salt has been poured into the |
| |
machine, the LOW SALT indicator light* switches off. |
| |
If the salt container is not filled, the water softener |
| |
and the heating element may be damaged as a result. |
|
Technical data
Dimensions | width 60 cm | |
height 85 cm | ||
| depth 60 cm | |
|
| |
Capacity | 14 standard | |
|
| |
Water supply | 0,05 ÷ 1MPa (0.5 ÷ 10 bar) | |
pressure | 7,25 – 145 psi | |
|
| |
Power supply | See appliance data plate | |
voltage | ||
| ||
|
| |
Total absorbed | See appliance data plate | |
power |
| |
Fuse | See appliance data plate | |
| This dishwasher conforms to the | |
| following European Community | |
| Directives: | |
| ||
| ||
| Compatibility) | |
| ||
| 1275/2008) (Ecodesign) | |
| ||
| ||
| and Electronic Equipment | |
| (WEEE) | |
|
|
*Only available in selected models.
3
