Troubleshooting
If the appliance does not work, before calling for Assistance (see Assistance), check for a solution from the following list.
GB
Malfunctions: | Possible causes / Solutions: |
The internal light does not illuminate.
The refrigerator and the freezer do not cool well.
The food inside the refrigerator is beginning to freeze.
The motor runs continuously.
•The plug has not been inserted into the electrical socket, or not far enough to make contact, or there is no power in the house.
•The doors do not close properly or the seals are damaged.
•The doors are opened too frequently.
•The TEMPERATURE ADJUSTMENT knob is not in the correct position
•The refrigerator or the freezer have been
•The atmospheric temperature of the area surrounding the appliance is lower than 14°C.
•The TEMPERATURE ADJUSTMENT knob is not in the correct position.
•The food is in contact with the back inside wall of the refrigerator.
•The door is not closed properly or is continuously opened.
•The outside ambient temperature is very high.
•The thickness of the frost exceeds
The appliance makes a lot of noise.
•The appliance has not been installed on a level surface (see Installation).
•The appliance has been installed between cabinets that vibrate and make noise.
•The internal refrigerant makes a slight noise even when the compressor is off. This is not a defect, it is normal.
Some of the external parts of the refrigerator become hot.
The back wall of the refrigerator unit is covered in frost or droplets of water.
There is water at the bottom of the refrigerator.
•These raised temperatures are necessary in order to avoid the formation of condensation on certain parts of the product.
•This shows the appliance is operating normally.
•The water discharge hole is blocked (see Maintenance).
8
