How to use your dryer
1.Plug in, switch on electricity.
WARNING: WHEN SWITCHING ON OR OFF, PLEASE ENSURE THAT YOUR HANDS ARE DRY
2.Sort your laundry (see section “Sorting Your Laundry”)
3.Open the door. Check that the fluff filter is clean (see section How to remove and clean the fluff filter).
4.Load the dryer placing the clothes carefully in the drum, pushing them well towards the back and away from the door seal. Close the door.
5.Select the relevant heat setting (see section “Sorting your Laundry”).
Push IN for high heat, for cottons, linens and synthetics.
Low setting - button OUT for acrylics and acrylic mixtures.
Button OUT LOW HEAT
Button IN
HIGH HEAT
6.Turn the Timer clock- wise to select the required drying time. (See Section “The Controls”.)
The dryer will start
7.When finished open the door and take out the laundry.
Clean and replace the fluff filter.
8.Switch off electricity and remove plug from socket.
WARNING: WHEN SWITCHING ON OR OFF, PLEASE ENSURE THAT YOUR HANDS ARE DRY
Never switch the dryer off with a hot load in the drum.
You must terminate every programme with the Cool Tumble Phase.
7
