4
GB
Dryer Description
The On/Off indicator light signals that your dryer
is in use or ready to select a programme. If this light
flashes it indicates a fault (see Troubleshooting).
The ON/OFF button : If the dryer is running and
this button is pressed, the dryer stops. Press again,
the dryer restarts.
The Progress or Delay lights show you the status of
the programme or the delay time when they flash.
During a delayed start the lights flash to show the
delay selected. When (not flashing) they show each
stage of the programme by the corresponding light
turning on (see Start and Programmes).
The PROGRAMMES knob sets the programme: rotate
it until the indicator is pointing to the programme you want
to select (see Start and Programmes).
The START/CANCELbutton starts a selected
programme. When you press this button there will be
one beep and the progress lights will flash to confirm
the action. If you have not set a programme, the buzzer
will beep four times. When a programme is running,
holding this button cancels the programme and stops
the dryer (see Start and Programmes).
The OPTION buttons/lights select available options for
your selected programme (see Start and
Programmes). The lights indicate that the option has
been selected.
The Programme Guide allows you to consult a user
friendly table of the available programmes.
The Clean Filter light gives you a reminder before
every programme that it is essential to clean the filter
every time the dryer is used (see Maintenance and Care).

Control panel

Clean Filter
Light
Programme Guide
PROGRAMMES
Knob
START/CANCEL
Button
Indicator
Options
Buttons and Lights
Progress or Delay
Lights On/Off
Light
ON/OFF
Button

The front The back

Control Panel Drum Air Intake Vent
Caution: Hot!
Vent Tube
fitted here
Rating plate
Model & Serial
numbers Filter