Wash cycles
GB
Table of wash cycles
cycles | Description of the wash cycle | |
Wash | ||
| ||
| Daily |
1White Cotton: extremely soiled whites.
2Cotton Standard (1): heavily soiled whites and resistant colours.
3Cotton Standard
4Synthetics: heavily soiled resistant colours.
4Synthetics (4): lightly soiled resistant colours.
5Mix Colored (5): lightly soiled whites and delicate colours. 20° Zone
6Cotton Standard
7Mix Light
820’ Refresh Special
9Outwear
10 Wool: for wool, cashmere, etc.
11 Jeans
Sport
12 Sport Intensive
13 Sport Light
14 Special Shoes
Partial wash cycles
Rinse
Spin + Drain
Max. | Max. | Detergents | Max. (kg)load | Residual dampness % | Energy consum- kWhption | waterTotallt | Cycle duration | ||
|
|
|
|
| |||||
|
|
|
|
|
|
| |||
temp. | speed |
|
|
|
|
|
|
| |
(°C) | (rpm) | Wash | Fabric |
|
|
|
|
| |
|
| softener |
|
|
|
|
| ||
|
|
|
|
|
|
|
| ||
90° |
|
|
| 6 |
|
|
| 125’ | |
|
|
|
|
|
| ||||
1600 | | | 44 | 2,10 | 70 | ||||
60° | 1600 | | | 6 | 44 | 1,03 | 49 | 190’ | |
40° | 1600 | | | 6 | 44 | 0,86 | 69 | 180’ | |
50° | 800 | | | 2,5 | - | - | - | 105’ | |
40° | 800 | | | 2,5 | 44 | 0,57 | 46 | 95’ | |
40° | 1600 | | | 6 | 44 | 0,60 | 50 | 85’ | |
20° |
|
|
| 6 |
|
|
| 170’ | |
1600 | | | - | - | - | ||||
20° | 800 | | | 6 | - | - | - | 120’ | |
20° | 800 | | | 1,5 | - | - | - | 20’ | |
30° |
| |
| 2 |
|
|
| 60’ | |
400 | - | - | - | - | |||||
40° | 800 | | | 1,5 | - | - | - | 70’ | |
40° | 800 | | | 3 | - | - | - | 70’ | |
30° |
|
|
| 3 |
|
|
| 85’ | |
600 | | | - | - | - | ||||
30° | 600 | | | 3 | - | - | - | 60’ | |
30° | 600 | | | Max. 2 | - | - | - | 60’ | |
pairs | |||||||||
|
|
|
|
|
|
|
| ||
- |
|
|
| 6 |
|
|
| 36’ | |
1600 | - | | - | - | - | ||||
- | 1600 | - | - | 6 | - | - | - | 16’ | |
|
|
|
|
|
|
|
|
| |
The length of cycle shown on the display or in this booklet is an estimation only and is calculated assuming standard working conditions. The actual duration can vary according to factors such as water temperature and pressure, the amount of detergent used, the amount and type of load inser- ted, load balancing and any wash options selected.
For all Test Institutes:
1) Test wash cycle in compliance with directive 1061/2010: set wash cycle 2 with a temperature of 60°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 60°C. The actual washing temperature may differ from the indicated value.
2) Test wash cycle in compliance with directive 1061/2010: set wash cycle 3 with a temperature of 40°C.
This cycle is designed for cotton loads with a normal soil level and is the most efficient in terms of both electricity and water consumption; it should be used for garments which can be washed at 40°C. The actual washing temperature may differ from the indicated value.
3)Long wash cycle for cottons: set wash cycle 3 with a temperature of 40°C.
4)Synthetic program along: set wash cycle 4 with a temperature of 40°C.
5)Short wash cycle for cottons: set wash cycle 5 with a temperature of 40°C.
8
