Personalisation
Setting the temperature |
| |
GB | ||
Turn the TEMPERATURE knob to set the wash temperature (see Table of wash cycles). | ||
| ||
The temperature may be lowered, or even set to a cold wash . The |
| |
ting a temperature which is higher than the maximum value set for each wash cycle. |
|
Setting the drying cycle
Turn the DRYING knob to select the desired drying op-
tion. There are two options:
A - Based on time: From 40 minutes to 180.
B - Based on the desired laundry dryness level:
Iron dry 
: suitable for clothes which will need ironing afterwards. the remaining dampness softens creases, making them easier to remove.
Hanger dry 
: ideal for clothes which do not need to be dried fully.
Cupboard dry 
: suitable for laundry which can be put back in a cupboard without being ironed.
Table of Drying times (guideline values)
Fabric | Load type | Max. | Cupboard | Henger | Iron | |
type | load (kg) | dry | dry | dry | ||
| ||||||
|
|
|
|
|
| |
| Clothing of diffe- |
|
|
|
| |
Cotton | rent sizes, Terry | 4 | 120 | 110 | 100 | |
| towels |
|
|
|
| |
|
|
|
|
|
| |
Synthe- | Sheets, Shirts, Py- | 3 | 140 | 120 | 100 | |
tics | jamas, socks, etc. | |||||
|
|
|
| |||
|
|
|
|
|
|
If your laundry load to be washed and dried is much greater than the maximum stated load (see adjacent table), perform the wash cycle, and when the cycle is complete, divide the garments into groups and put some of them back in the drum. At this point,
follow the instructions provided for a “Drying only” cycle. Repeat this procedure for the remainder of the load.
Drying only
Use the cycle selector knob to select a drying cycle
Functions
The various wash functions available with this
1.Press the button corresponding to the desired function;
2.the function is enabled when the corresponding indicator light is illuminated.
Note: If the indicator light flashes rapidly, this signals that this particular function may not be selected in conjunction with the selected wash cycle.
Selecting this option enables you to suitably adjust drum rotation, temperature and water to a reduced load of lightly soiled
cotton and synthetic fabrics (refer to the “Table of wash cycles”). “
” enables you to wash in less time thereby saving water and electricity. We suggest using a liquid detergent suitably measured out to the load quantity.
!This function may not be used in conjunction with cycles 1, 5, 6, 7, 8, 9, 10, 11, 12, 13, 
, 
, 
.
Press this button to reduce the spin speed.
!This function may not be used in conjunction with cycles 6, 11, 12, 13, 
.
Intensive Wash
Because a greater quantity of water is used in the initial phase of the cycle, and because of the increased cycle duration, this function offers a
!This function may not be used in conjunction with cycles 5, 6, 7, 8, 9, 10, 11, 12, 13, 
, 
, 
.
Delay timer
This timer delays the start time of the wash cycle by up to 9 hours. Press the button repeatedly until the indicator light correspond- ing to the desired delay time switches on. The fifth time the button is pressed, the function will be disabled.
N.B. Once the START/PAUSE button has been pressed, the delay time can only be modified by decreasing it until launching the set programme.
!This option is enabled with all programmes.
9
