Connecting the drain hose

• the supply voltage is included within the values i

65 - 100 cm

Connect the drain hose, without bending it, to a draining duct or a wall drain situated between 65 and 100 cm from the floor;

ndicated on the Technical details table

GB

 

(see page 5);

 

the socket is compatible with the washing machine's plug. If this is not the case, replace the socket or the plug.

Your appliance is now supplied with a 13 amp fused plug it can be plugged into a 13 amp socket for immediate use. Before using the appliance please read the instructions below.

Where it connects to the waste water pipe cut end off spigot or remove the blanking cap

The drain hose may be connected to an under-sink trap. Before connecting the drain hose from the machine ensure that any blanks or removable ends have been taken off the spigot.

If it is place over the edge of a basin or sink be sure the free end of the hose should not be underwater.

WARNING - THIS APPLIANCE MUST BE EARTHED. THE FOLLOWING OPERATIONS SHOULD BE CARRIED OUT BY A QUALIFIED ELECTRICIAN.

Replacing the fuse:

When replacing a faulty fuse, a 13 amp ASTA approved fuse to BS 1362 should always be used, and the fuse cover re-fitted. If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug. Replacements can be obtained directly from your nearest Service Depot.

Removing the plug:

If your appliance has a non-rewireable moulded plug and you should wish to re-route the mains cable through partitions, units etc., please ensure that either:

￿We advise against the use of hose extensions; in case of absolute need, the extension must have the same diameter as the original hose and must not exceed 150 cm in length.

Ensure that if the drain hose is pushed into a standpipe, that the end does not go down more than 15cms (6 inches). If the hose is pushed down too far, this may cause the machine to self -syphon ie. continuously empty as it is filling.

Electric connection

Before plugging the appliance into the mains socket, make sure that:

the socket is earthed and in compliance with the applicable law;

the socket is able to sustain the appliance's maximum power load indicated in the Technical details table (see page 5);

the plug is replaced by a fused 13 ampere re- wearable plug bearing the BSI mark of approval. or:

the mains cable is wired directly into a 13 amp cable outlet, controlled by a switch, (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug:

Ensure that before disposing of the plug itself, you make the pins unusable so that it cannot be accidentally inserted into a socket.

Instructions for connecting cable to an alternative plug: Important: the wires in the mains lead are coloured in accordance with the following code:

Green & Yellow Earth

BlueNeutral

Brown Live

3

Page 3
Image 3
Indesit IWDE 126 manual 65 100 cm

IWDE 126 specifications

The Indesit IWDE 126 is a versatile washer-dryer that combines efficiency and convenience in one sleek appliance. Designed for modern households, this model is ideal for those who seek to save time and space without compromising on the quality of their laundry.

One of the most notable features of the IWDE 126 is its impressive capacity. With a washing load of up to 6 kg and a drying capacity of 5 kg, it is capable of handling medium-sized laundry loads, making it perfect for families or busy individuals who require efficiency in their laundry routine. The ability to wash and dry in one go simplifies the process, eliminating the need for transferring wet clothes.

In terms of performance, the IWDE 126 is equipped with a variety of washing programs catering to different types of fabrics and soil levels. The machine includes dedicated cycles for cotton, synthetics, and delicate items, ensuring optimal care for every garment. Moreover, the rapid wash option provides quick cleaning for lightly soiled clothes, washing them in just 30 minutes.

The dryer features a range of drying options too, including timed and sensor drying settings. The sensor drying technology detects the moisture levels in the drum and automatically adjusts the drying time, preventing over-drying and protecting your clothes. This not only enhances fabric longevity but also helps save energy.

Energy efficiency is a key consideration for the Indesit IWDE 126. This model is rated Class B, which, while not the highest rating available, still ensures that energy consumption remains reasonable. The appliance is designed to use water and electricity judiciously, which can lead to lower utility bills over time.

Another impressive aspect of the IWDE 126 is its user-friendly interface. The simple, intuitive controls make selecting programs and adjusting settings straightforward, even for those who may not be tech-savvy. The clear display allows users to keep track of time remaining and selected wash programs.

In conclusion, the Indesit IWDE 126 washer-dryer stands out with its compact size, efficient washing and drying capabilities, and a wide range of programs tailored to meet various laundry needs. Ideal for users looking for a reliable and effective laundry solution, this appliance strikes a balance between practicality and performance.