![](/images/new-backgrounds/1322780/32278023x1.webp)
Care and maintenance
GB | Cutting off the water and electricity supplies | |
• Turn off the water tap after every wash cycle. This will | ||
| ||
| limit wear on the hydraulic system inside the washing | |
| machine and help to prevent leaks. | |
| • Unplug the washing machine when cleaning it and du- | |
| ring all maintenance work. | |
| Cleaning the washing machine | |
| The outer parts and rubber components of the appliance | |
| can be cleaned using a soft cloth soaked in lukewarm | |
| soapy water. Do not use solvents or abrasives. | |
| Cleaning the detergent dispenser drawer | |
| Remove the dispenser by | |
| raising it and pulling it out | |
| (see figure). | |
| Wash it under running wa- | |
| ter; this operation should be | |
| repeated frequently. |
Caring for the door and drum of your appliance
•Always leave the porthole door ajar in order to prevent unpleasant odours from forming.
Cleaning the pump
The washing machine is fitted with a
!Make sure the wash cycle has finished and unplug the appliance.
To access the
1. using a screwdriver, remove the cover panel on the lower front part of the washing machine (see figure);
2. unscrew the lid by rota- ting it
3.clean the inside thoroughly;
4.screw the lid back on;
5.reposition the panel, making sure the hooks are securely in place before you push it onto the appliance.
Checking the water inlet hose
Check the inlet hose at least once a year. If there are any cracks, it should be replaced immediately: during the wash cycles, water pressure is very strong and a cracked hose could easily split open.
!Never use
12