Indesit K3C36/G manual Electronic Cooking Programmer

Electronic Cooking Programmer

This feature allows you to program the oven or the grill as follows :

•delayed start for a specific length of time;

•immediate start for a specific length of time;

•timer.

Button Functions:

: timer - hours and minutes;

: cooking time;

: end cooking time;

s: set cooking time - backward;

t: set cooking time - forward.

How to reset the digital clock.

After the appliance has been connected to the power supply, or when the power has gone out, the clock display will automatically reset to 0:00 and begin to blink.

•Press the and buttons consecutively and then reset the time (within 4 seconds) using the s and t buttons.

The t button sets the time forward.

The s button sets the time backward.

Whenever the time must be reset, follow this same procedu- re.

Manual Operation of the Oven

After resetting the time, the program automatically switches to the manual mode.

Note: To reset the manual mode after each “automatic”

cooking, press the and buttons simultaneously.

Start delayed cooking with preset duration

The length of the cooking program as well as the time at which the cooking program ends must be set. If we assume that the time displayed on the timer is 10:00:

1.Turn the oven control knobs to the feature and tempera- ture desired (e.g. conventional oven, 200°C);

2.Press the button and then set the cooking time (within four seconds) using the s and t buttons. Let us sup- pose that we set the cooking time at 30 minutes. The display will read as follows:

N

After the button has been released, the current time will be displayed again after approximately 4 seconds, along

with the m symbol and the letter “A” (AUTO);

3.Press the button and then use the sand tbuttons to set the time for when the cooking program should end. Let us suppose this time to be 1:00 p.m.

O

4.After the button has been released, the current time will be displayed after approximately 4 seconds:

P

The letter “A” will light up reminding you that the length and end cooking time were programmed in automatic mode. At this point, the oven will turn on automatically at 12:30 and then turn off after 30 minutes. When the oven is

turned on, the m symbol will be displayed for the entire cooking time. At any time during the cooking process, the length of the cooking time can be displayed by pressing

the button, and the end cooking time by pressing the

button.

After the cooking time has expired, the timer will ring for several minutes; to turn it off, simply press any of

the buttons except the s and t buttons.

Immediate start with preset duration

By programming just the duration (points 1 and 2 of the “Start delayed cooking with preset duration” section), cooking will start up immediately.

To cancel a cooking schedule already programmed

Press the and buttons simultaneously.

Timer Feature

The timer feature allows you to enter a given amount of time from which the timer begins to count down.This feature does not turn the oven on or off; it merely sounds when the time has expired.

When the button has been pressed, the display will read as follows:

Q

Then use the t and s buttons to set the desired time. After the button has been released, the timer will start to count down and the current time will be displayed.

R

After the time has expired, an acoustical signal will be emitted, which can be turned off by pressing any of the buttons (except

the t and s buttons) at this point the symbol will also turn off.

Correction/Cancellation of Data

•The data entered can be changed at any time by pressing the corresponding button and the t or s buttons.

•When the data for the length of the cooking time is cancelled, the data for the end cooking time are also cancelled automatically, and vice versa.

•If the oven has been programmed, it will not accept end cooking times which are before the start of the cooking process.

Buzzer volume control

Once you have made and confirmed the clock settings, use button s to adjust the volume of the alarm buzzer.

8