Installation

 

! Before placing your new appliance into operation please

GB

read these operating instructions carefully. They contain

 

important information for safe use, for installation and for

 

 

care of the appliance.

 

! Please keep these operating instructions for future

 

reference. Pass them on to possible new owners of the

 

appliance.

 

Positioning and connection

Positioning

1.Place the appliance in a well-ventilated humidity-free room.

2.Do not obstruct the rear fan grills. The compressor and condenser give off heat and require good ventilation to operate correctly and save energy.

3.Leave a space of at least 10 cm between the top part of the appliance and any furniture above it, and at least 5 cm between the sides and any furniture/side walls.

4.Ensure the appliance is away from any sources of heat (direct sunlight, electric stove, etc.).

Levelling

1.Install the appliance on a level and rigid floor.

2.If the floor is not perfectly horizontal, adjust the refrigerator by tightening or loosening the rear feet.

Electrical connections

After the appliance has been transported, carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains. Before inserting the plug into the electrical socket ensure the following:

•The appliance is earthed and the plug is compliant with the law.

•The socket can withstand the maximum power of the appliance, which is indicated on the data plate located on the bottom left side of the fridge (e.g. 150 W).

•The voltage must be in the range between the values indicated on the data plate located on the bottom left side (e.g. 220-240V).

•The socket is compatible with the plug of the appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it (see Assistance). Do not use extension cords or multiple sockets.

!Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

!The cable must not be bent or compressed.

!The cable must be checked regularly and replaced by authorised technicians only (see Assistance).

!The manufacturer declines any liability should these safety measures not be observed.

Your appliance is supplied with a 13amp fused plug that can be plugged into a 13amp socket for immediate use. Before using the appliance please read the instructions below.

WARNING:

THIS APPLIANCE MUST BE EARTHED.

Replacing fuse covers:

When replacing a faulty fuse, a 13amp ASTA approved fuse to BS 1362 should always be used and the fuse cover re-fitted.

If the fuse cover is lost, the plug must not be used until a replacement is obtained.

Replacement fuse covers:

If a replacement fuse cover is fitted, it must be of the correct colour as indicated by the coloured marking or the colour that is embossed in words on the base of the plug.

Changing the plug:

Removing the plug

If your appliance has a non-rewireable moulded plug and you should wish to remove it to add a longer cable or to re-route the mains cable through partitions, units etc. please ensure that either:

- The plug is replaced by a fused 13amp re- wireable plug bearing the BSI mark of approval.

or

-The mains cable is wired directly into a 13amp cable outlet, controlled by a switch (in compliance with BS 5733) which is accessible without moving the appliance.

Disposing of the plug

Cut off and dispose of the supplied plug if it does not fit your socket. The cable should be cut as close as possible to the moulded plug.

Remove the fuse.

WARNING:

To avoid a shock hazard do not insert the discarded plug into a socket anywhere else.

12

Page 1 Page 3
Page 2
Image 2
Indesit TAAN 25 operating instructions Installation, Positioning and connection, Levelling, Electrical connections
Page 1 Page 3

TAAN 25 specifications

The Indesit TAAN 25 stands out as a practical and efficient refrigerator designed to cater to a wide array of consumer needs. One of its most notable features is its spacious interior, offering ample room for food storage and organization. With adjustable shelves and door compartments, users can easily customize the space to accommodate various sizes of items, from tall bottles to stacked containers.

Equipped with advanced cooling technologies, the TAAN 25 ensures optimal freshness for all your groceries. The refrigerator utilizes a static cooling system that maintains a consistent temperature throughout the unit, preventing temperature fluctuations that could compromise food quality. This is particularly beneficial for perishables, allowing fruits and vegetables to retain their freshness for more extended periods.

Energy efficiency is another critical characteristic of the Indesit TAAN 25. It is designed to minimize energy consumption, earning an impressive rating on energy efficiency scales. This is achieved through effective insulation and an energy-saving compressor that operates silently while providing reliable cooling performance. As a result, users can expect lower electricity bills without sacrificing performance.

The TAAN 25 also boasts an attractive and modern design that fits seamlessly into a variety of kitchen styles. Its sleek exterior is complemented by an easy-to-clean interior, making maintenance a breeze. The removable shelves and drawers allow for effortless cleaning, ensuring that the appliance remains hygienic and ready for use at all times.

In terms of convenience, the Indesit TAAN 25 features a reversible door, providing flexibility in installation. This allows it to be adapted to different kitchen layouts, making it a versatile choice for any home. The interior lighting is another thoughtful addition, illuminating the contents of the refrigerator so that users can quickly find what they need, even in low-light conditions.

Overall, the Indesit TAAN 25 combines practicality, efficiency, and modern design to deliver a refrigerator that meets everyday needs. With its spacious interior, energy-efficient operation, and user-friendly features, the TAAN 25 serves as a reliable companion in the kitchen, helping to keep food fresh while making storage an effortless task. Whether you are a busy professional or a family-oriented individual, the TAAN 25 is designed to simplify your food storage requirements while enhancing your overall kitchen experience.
Top Page Image Contents