Infinite Peripherals IP-BC-BT .Setting Up Scanner, 4.Select device named “Cordless”, 5.Use 0000 as the Bluetooth® Passkey when requested, 6.Save and exit, Palm OS:, [Add Device]

.

.

.

.

.

.

.

.

.Setting Up Scanner

The IP-BC-BT scanner requires Bluetooth® enabled PDA or Smartphone to communicate using Bluetooth® technology.

Depending on your device type the steps for setting up or pairing your device to the IP-BC-BT scanner will vary slightly but the overall process should be similar to the steps below.

1.First step is to pair IP-BC-BT to your PDA or Smartphone. This is usually done using the device’s Bluetooth® Manager.

2.When ready, place the scanner in discovery mode by pressing the scan button.

3.On your PDA or Smartphone, select the option to add new Bluetooth® devices. The actual command option will depend on your device type and could be one of the following:

a.	BlackBerry OS:	[Add Device]
b.	Pocket PC OS:	[Explore a Bluetooth® device]
c.	Palm OS:	[Add Device]
d.	Windows Mobile:	[New Partnership]

Or it could be something similar to one of the above options. Refer to your device user manual for details on pairing Bluetooth® devices.

4.Select device named “Cordless”.

5.Use 0000 as the Bluetooth® Passkey when requested.

6.Save and exit.

If the steps above have been successful, the scanner and your PDA or Smartphone are now paired with each other and ready to use Bluetooth® communications.

Infinite Peripherals, Inc.	. . . . . .	Page 8
www.ipcprint.com		. . . . . . . . . . . . . . . . . . . . . .
IP-BC-BT User’s Manual v1.01