SUBWOOFER CONTROLS
Rear Panel
¡
LEVEL
Min
Max
LFE
NORMAL
™
£PHASE 0˚
180˚
CROSSOVER
FREQUENCY
¢50Hz | 150Hz |
L ∞ R
LINE LEVEL IN
For LFE use L or R
ON | OFF |
§POWER
|
|
| ® |
SUB1100 |
| ||
|
|
|
|
| CAUTION |
|
|
| RISK OF ELECTRIC SHOCK |
| ® |
| DO NOT OPEN |
|
|
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, | NRTL/C | ||
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. | CSA22.2 | ||
UL1492 | |||
AVERTISSEMENT: POUR PRÉVENIR LES RISQUES D’INCENDIE OU |
| ||
DE CHOC ÉLECTRIQUE, ÉVITER D’EXPOSER CET APPAREIL A LA |
| ||
PLUIE OU A L’HUMIDITÉ. |
| ||
LFE/Normal Switch
Phase Switch
Power Switch
A Few Suggestions
We recommend that you do not operate your speakers or subwoofer with the bass, treble and loudness controls set to full boost. This will place undue strain on your electronics and speakers and could damage them.
The volume control setting on your processor/preamp or receiver is not a specific indication of the overall loudness level of the speakers. The only important consideration is the loudness level at which the system can be played, regardless of where the volume control is set.
Always turn down the volume control setting on your processor/ preamp or receiver when changing a cassette or CD, or switching inputs to AM or FM operation. Excessively loud transients (clicks or popping sounds) can damage the satellite speakers and possibly the subwoofer.
Important!
Whenever changing cables, pulling plugs, etc., ALWAYS TURN OFF ALL EQUIPMENT, including the subwoofer.
