CONTROLS AND FUNCTIONS
REMOTE CONTROL
Figure 4. REMOTE LEVEL controls.
SUB LEVEL: Use this control to adjust the amount of bass to suit your preference.
PHANTOM CENTER:
LEFT: Slide the switch to this position to provide a phantom center for front left seating position. OFF: Slide the switch to this position to turn off Phantom Center processing.
RIGHT: Slide the switch to this position to provide a phantom center for front right seating position.
Note: Once you have chosen the best Phantom Center switch position and made the necessary adjustments to the Front Gain and Rear Gain controls and set the Subwoofer Level control and Phase switch, you won’t need to make any further adjustments on the BassLink II or the 4sc.
BASSLINK 4sc
Figure 5. BassLink 4sc controls.
PHANTOM CENTER: Use this switch to select the proper adjustment of the Phantom Center circuit according to your car and your preference.
FRONT/REAR GAIN: Use these to adjust the levels of the front and rear speakers.
POWER LED:This indicator will glow blue when BassLink II and 4sc are operational.
BASSLINK II
Figure 6. BassLink II controls on the front panel.
POWER LED:This indicator will glow blue when BassLink II is operational.
GAIN Control: Use this control to adjust the relative volume (loudness) of BassLink II with respect to the other speakers in the vehicle.
CROSSOVER: Use this control to adjust the amount of
BASS BOOST: Use this control to correct any perceived peak or dip in the bass response (typically around 40Hz in most vehicles). Set the control to any value between
Figure 7.
PHASE Control: Use this switch to reverse the phase of BassLink II’s output with respect to its input.
AUTO TURN ON: For
SERVO LED:This indicator glows blue when the subwoofer is at maximum excursion and the amplifier is modifying the output to maintain maximum performance.
For more information about using the controls, see “Tuning BassLink II and 4sc” on page 5.
4
