Infinity IL60 L/R service manual System Type

IL60 L/R

Controls and Connections

The Interlude IL50 and IL60 offer unprecedented flexibility for connecting the system to any type of audio or home-theater system. Consult the table at right to determine which system description most closely matches your own, then follow the hook-up method corresponding to that system.

If none of these system configurations seem to match yours, consult your dealer or Infinity customer service for direction on how best to hook up your system.

For methods 2, 3a, 3b and 4, make sure all bass-management features are properly set. The Audio channels should all be set to “Small” or “High-Pass” and the subwoofer set to “On.”

RED = +

System Type	Connection
	Methods
2-Channel receiver or integrated amplifier	1
that has no subwoofer output or
Pre-out/Main-In connectors
2-Channel receiver or integrated amplifier	2
with preamp output and input connectors
2-Channel system with separate preamplifier	2
and power amplifier
Dolby* Pro Logic* with THX® , Dolby Digital,	3a
or DTS® receiver with a filtered subwoofer
(or LFE) output connector
Dolby Digital or DTS processor with separate	3b
power amplifiers or multichannel amplifier
Non-THX certified Dolby Pro Logic receiver	4
with full-range subwoofer outputs

METHOD 1

BLACK = -

1. LOOSEN TERMINALS

(ONE CHANNEL SHOWN)

2. INSERT BARE END:	AMPLIFIER/RECEIVER
TIGHTEN TERMINALS			SPEAKER
			OUTPUTS
3. SET INPUT SUB 3	+	-	+	-	+
TO "SPEAKER"

STRIPE= +

4. SET LOW-PASS FILTER 4

"ON"

®

NO STRIPE = -

O

	RED = +				AC CORD
METHOD 2
	BLACK = -
1. LOOSEN TERMINALS
2. INSERT BARE END:
TIGHTEN TERMINALS
3. SET INPUT SUB 3		AMPLIFIER/RECEIVER
TO "LINE LEVEL"		SPEAKER OUTPUTS
	STRIPE= +			SPEAKER
4. SET LOW-PASS FILTER 4				OUTPUTS
"ON"	NO STRIPE = -	+	-	-	+	+
			LEFT		RIGHT

®

00354

O

AC CORD

(ONE CHANNEL SHOWN)
PREAMP OUTPUTS	AMPLIFIER INPUTS
L	L
R	R

00359-2

7