Infinity Kappa, 202a owner manual Installation, R T S L I S T, U N T I N G T H E a M P L I F I E R

I N S T A L L A T I O N

The Kappa 202a is easy to install. For optimum performance, we recommend using high-quality, twisted- pair shielded RCA audio cables and 14-gauge or larger speaker wire. Also, you’ll need a minimum of 12-gauge stranded copper wire (e.g., red and black jackets) for the power connections. Use 18-gauge (e.g., blue jacket) wire for remote turn-on.

Depending on your total system plan, allow for adequate time and the possibility of overnight storage of your vehicle, since it may take more than one day to complete the installation.

P A R T S L I S T . . .

Examine and verify that the package includes the following items:

•(1) Kappa 202a Power Amplifier

•(2) Spare ATC fast-blow fuses (40 A)

•(1) Control cover with (2) machine screws

•(1) Weco 5-pin audio connector

•(1) Weco 2-pin power connector

•(4) #8 mounting screws

M O U N T I N G T H E A M P L I F I E R . . .

The Kappa 202a can be mounted in virtually any location inside the vehicle. However, make sure to keep the amplifier away from heater vents or ducts.

1.At the chosen site, use the amplifier as a mounting template and mark locations of the four mounting holes.

2.Drill a small pilot hole at each marked location.

3.Mount the amplifier and securely tighten the mounting screws.

W I R I N G T H E A M P L I F I E R . . .

Refer to Figure 7 (below) for details of the Kappa 202a’s front and rear panel connections.

1.For power, remote, and speaker wires, strip 1 ⁄4" off one end of each jacket to reveal bare wire for insertion into the Weco connectors.

2.Using the Weco 2-pin power connectors, connect individual black wires from the nearest bare-metal chassis component to each (–) terminal. Then, connect individual red wires from the vehicle’s +12-volt battery terminal to each (+) terminal.

KAPPA 202a WIRING CONNECTIONS

(front panel)

KAPPA 202a WIRING CONNECTIONS

(rear panel)

Figure 7. Wiring connections for the Kappa 202a amplifier.

6 – Infinity Kappa 202a Power Amplifier