Infinity TSS-SAT800 manual Wall-Mountingthe Satellites, Using the Satellite on the Shelf Stand

Using the Satellite on the Shelf Stand

To attach the satellite to the shelf stand, hold the satellite on top of the stand and insert the two included screws through the rear of the stand and into the rear of the speaker.

Adjustable Wall Bracket

Step 1. Mark the positions on the wall where you would like to place the mounting screws.

Step 2. Place the bracket against the wall and fasten four

1-1/2" #10 wood screws through the bracket’s screw holes into the wall. If a wall stud is not available, use an appropriate anchor.

WALL-MOUNTING THE SATELLITES

The TSS-SAT800 satellite is designed to be mounted on the wall. There is a fixed-mount wall bracket and an adjustable wall bracket provided for each satellite. Each speaker bracket will

Step 3. Unscrew round collar (C) from bracket (A).

require up to four 1-1/2" #10 wood screws; each screw should be fastened to a wall stud. If a wall stud is unavailable, install an anchor appropriate for a 1-1/2" #10 screw.

NOTE: The customer is responsible for the correct selection and use of mounting hardware (available through hardware stores) that will ensure the proper and safe wall-mounting of the speakers.

Fixed-Mount Wall Bracket

Step 1. Mark the positions on the wall where you would like to place the mounting screws.

Step 2. Attach the back plate of the bracket to the wall using three screws (not included).

Step 3. Attach the front plate (with the spring tab) of the bracket to the satellite using the two provided screws.

Step 4. Slide the speaker with the attached bracket front plate onto the back plate of the bracket until the tab locks into place.

To remove the speaker

from the wall, simply push in the locking tab and slide

the speaker up.

keyhole on the back of the speaker to the screwhead on the wall. Once positioned properly, the speaker should slide down slightly and become secure.

A

B

C

4TSS-SAT800