InFocus DH 24PD2 Specifications, Standard Accessories, Drilling anchor holes rotation + hammering

English

SPECIFICATIONS

Voltage (by areas)*	(110V, 230V)
Power Input	720W*
No-load speed	0 – 1050 min–1
Full-load impact rate	0 – 4600 min–1
Capacity: concrete	3.4 – 24 mm
steel	13 mm
wood	32 mm
Weight (without cord and side handle)	2.8 kg
Dust collecting adapter
Max. hole-drilling depth:	100 mm (adjustment possible between 0 and 100 mm)
Diameter of drill:	3.4 – 24 mm
Max. length of drill (overall length):	270 mm
Dustbag capacity:	0.4 liters
*Be sure to check the nameplate on product as it is subject to change by areas.

STANDARD ACCESSORIES

(1)	Case (Molded plastic)	1	[Numbers (3) and (4) refer to use on concrete]
(2)	Side handle	1	(5) Cap	1
(3)	Dust collecting adapter	1	Standard accessories are subject to change without
(4)	Dust bag	1	notice.

OPTIONAL ACCESSORIES (sold separately)

1.Drilling anchor holes (rotation + hammering)

◯ Drill bit (Slender shaft)

Drill bit (Slender shaft)	Adapter for slender shaft
	(SDS-plus shank)
Drill bit (slender shaft)
Outer diameter	Effective length	Overall length
3.4 mm	45 mm	90 mm
3.5 mm

◯Drill bit (Taper shank) and taper shank adapter

Drill bit (Taper shank)	Taper shank adapter
	(SDS-plus shank)
	Cotter
Outer diameter	Taper mode	Applicable drill bit
11.0 mm	Morse taper (No.1)	Drill bit (taper shank)	11.0 ~ 17.5 mm
	Morse taper (No.2)	Drill bit (taper shank)	21.5 mm
12.3 mm
12.7 mm	A-taper	Taper shank adapter formed A-taper or B-taper
14.3 mm	B-taper	is provided as an optional accessory, but the
14.5 mm		drill bit for it is not provided.
17.5 mm
21.5 mm

35