InFocus RealCam Assembly Guide
1
InFocus® RealCam
Adapter
Sony® EVI-HD7V
3 Connect the power cord to the camera
?www.infocus.com/support
2 | Connect the RealCam Adapter to the |
camera and Mondopad device |
Connect to the camera's DVI video port
Connect to the Mondopad
device's USB portConnect to the camera's VISCA port
www.infocus.com/support
i
IMPORTANT INFORMATION:
•The camera is pre-configured for the recommended resolution of 1920x1080@29.97fps. To confirm this setting, verify that that the blue System Select switch on the back of the camera is set to “1.” Additional details can be found in the Sony user manual.
•The Sony EVI-HD7V camera does not contain an embedded microphone. An external microphone like the ClearOne® Chat® series or the Jabra SPEAK™ series must be used.
•The Sony EVI-HD7V camera is warranted through Sony.
•To install the RealCam camera kit (p/n INF-SPTZ) on the top of your Mondopad device, you will need the INF-PTZMNT. The INF-VIDSHELF can also be used (compatible with the INF-FLRSTAND and the INF-MOBCART only).
•To use the camera kit (p/n INF-SPTZ) on a shelf below the Mondopad device, you will need the INF-ACCYSHELF (compatible with both the INF- FLRSTAND and INF-MOBCART) or the INF-ACCYSHELFPRO-x (compatible with the INF-MOBCARTPRO-x).
