49
1Turn off the projector and unplug the power cord.
2Wait 60 minutes to allow the projector to cool thoroughly.
3Turn the projector upside down on a soft cloth so that the lamp door is facing
you.
4Loosen the two captive screws on the lamp door and lift the door off.
5Loosen the two captive screws that attach the lamp housing to the projector.
6Carefully remove the lamp housing. Dispose of the lamp in an environmentally
proper manner.
7Install the new lamp housing and tighten the screws.
8Replace the lamp door.
9Plug in the power cord and press the Power button to turn the projector back on.
10 To reset the lamp hour timer, navigate to the Advanced > Status/Service menu
and select Reset Lamp Hours. See page 31 for details.
loosen screw
loosen screw