45
Auto: Auto channel switching is not supported.
3Save the configuration by highlighting the checkmark and press the Select key.
4If you want to exit without saving either press the Menu key or highlight the X
and press the Select key. The AP mode icon will display in the upper right
corner of the projected image.
Client Mode
To connect to an existing WiFi network:
1Highlight Client mode and press the Select key.
2Use the left arrow to highlight On and press the Select key. The Settings menu
for Client Mode will open.
3Highlight the desired SSID and press the Select key.
4If necessary, select the correct PSK type for your network, ASCII or HEX16.
5If necessary, select the correct index for your network (1-4).
6If necessary enter the PSK, highlight PSK and press the Select key.
7Using the arrow keys and onscreen keyboard, highlight an alphanumeric
character or symbol, and press the Select key.
8Repeat until the PSK is complete.
9Press the Menu key to exit the keyboard.
10 To accept the changes highlight OK and press the Select key.