Using the menus
1Press menu, then press 
or 
to review menus.
2Press select to enter a menu, then press or
to review settings.
3 Press select to change a setting. If this shows more choices, press 
or
to update the setting, then press select or menu to save it.
4Press menu to go back. Press it again to remove the menu.
Note: Most picture settings are disabled (gray) unless a source is being displayed.
Controlling your presentations
Connect the USB cable between the projector and your computer (see step 3 ), then press 
and 
to move through your presentation slides.
6 Turn off the projector
Press the power button
The power light on the projector will blink while the fan cools the lamp. If you need to unplug the projector, wait until the fan stops and the power light stops blinking and stays on.
Note: While the power light is blinking, button presses on the projector and remote are ignored.
7 Register your product
Activate your warranty to ensure eligibility for service and support.
Get special offers and notifications about free product updates.
1 Write down your projector's serial number
It's printed on the label on the back of the projector. You'll need it to register (and if you ever need to contact support).
Serial number:
2 Go to www.infocus.com/register
8
Optional: Read the Reference Guide
Download it at www.infocus.com/support
The Reference Guide is available in multiple languages. It covers advanced setup and operation, including lamp replacement instructions.
