48
4Loosen the captive screws that attach the lamp housing to the projector.
Carefully remove the lamp housing. Dispose of the lamp in an
environmentally proper manner.
5Install the new lamp module and tighten the screws.
6Replace the lamp door by sliding it into place and tightening both
screws.
7Plug in the power cord and press the Power button to turn the projector
back on.
8To reset the lamp hour timer, navigate to the Status and Service menu and
select Reset Lamp Hours (on page 37).
Using the security lock
The projector has a security lock for use with a Cable Lock System. Refer to
the information that came with the lock for instructions on how to use it.
loosen screw
security lock